Contents: Lubricants, working fluids, sealants… ↳ Refrigerant filling volumes (when… ↳ Cooling oil filling volumes ↳ Adding air conditioning system… ↳ Air Conditioning (A/C) Clutch ↳ Tightening torque specification ↳
Lubricants, working fluids, sealants and adhesives
| Position | Specification |
| Refrigerant R134a | WSH-M17B19-A |
| Cooling oil | WSH-M1C231-B |
| Ford Brand A/C System Flush Solvent F4AZ-19579A | - |
| Fluorescent lamp/R fluorescent indicator dye, 164-R-3712 | - |
Refrigerant filling volumes (when charging)
| g | |
| Air conditioning system A/C | 740±15 |
Cooling oil filling volumes
| ml | |
| Air conditioning system A/C | 200 |
Adding air conditioning system cooling oil (when replacing components)
| ml | |
| Air conditioning (A/C) compressor, if the amount of refrigerant oil drained from the A/C compressor is less than 90 ml. | Add 90 ml. |
| Air conditioning (A/C) compressor, if the amount of refrigerant oil drained from the A/C compressor is between 90 and 150 ml. | Add cooling oil in an amount equal to the drained one + 30 ml. |
| Air conditioning (A/C) compressor, if the amount of refrigerant oil drained from the A/C compressor exceeds 150 ml. | Fill in an amount equal to that drained. |
| Air Conditioning (A/C) Condenser Core | Add 30 ml. |
| Air Conditioning (A/C) Evaporator Core | Add 90 ml. |
| Suction tank | Add cooling oil in an amount equal to the drained one + 90 ml. |
| When replacing all lines and elements. | Add 60 ml. |
| Every time if the cooling oil is collected after draining the refrigerant. | Fill in an amount equal to that drained. |
| Air conditioning system after flushing the system | Add 200 ml. |
Air Conditioning (A/C) Clutch
| mm | |
| Air gap in the air conditioning (A/C) system clutch | 0.35 - 0.75 |
Tightening torque specification
| Name | Nm | Pound foot | Pound-inch |
| Air Conditioning (A/C) Compressor Drive Disc Mounting Bolt | 13 | 10 | - |