External door handle — removal and installation

Removal

1. Remove the front door trim panel. Refer to Section 501-05 for additional information.

2.

CAUTION: Do not touch the adhesive surface as this will disrupt the re-bonding.

Bend the seal back.



3. Remove the outer door handle hole gasket from the door.



4.

NOTE: The screw must be completely removed from the door lock cylinder surround, but does not have to be completely removed.

Loosen the screw.



5. Remove the door lock cylinder trim.



6. Remove the outside door handle.

• 1. Slide and unfasten the outside door handle.
• 2. Remove the outer door handle and gaskets.

Installation

1. Install the elements back in place in reverse order.