Contents: Door seal ↳ Door opening seal ↳
Door seal
1. Open the door and unscrew the seal mounting screws from the lock side. On the back door, unscrew the screws from the hinge side as well.
2. Carefully lift the seal from the lock side and remove it from the door.
3. Installation is carried out in the reverse order of removal.
4. Insert the seal into place, pressing it with your palm.
Door opening seal
1. Open the door and unscrew the screws securing the seal at the bottom of the opening.
2. Remove the old door opening seal.
3. Install the new door opening seal, starting from the upper right corner of the opening.
4. Insert the sealant into the remaining corners and bends of the opening and, lastly, into the straight sections.
5. Tighten the screws securing the seal at the bottom of the opening.
(The original can be found on the specified resource: FordBook)