WARNING: Adjust the driver's seat only when the vehicle is stationary. If you attempt to adjust the seat while driving and the seat is not properly locked in the fore/aft direction and it moves unexpectedly, you may lose control of the vehicle.
To adjust the front seats in the longitudinal direction, pull up the locking lever handle and move the seat on the runners to a comfortable position. After installing the seat, lower the handle and move the seat back and forth slightly until it is securely fixed.
NOTE: For a seat with three-way adjustment (backrest tilt, fore/aft position, and seat cushion height), to change the fore/aft position, move the lower lever on the left side of the seat cushion forward or backward, depending on where you want the seat to move.
The backrest tilt is adjusted steplessly by turning the handle at the base of the backrest.
NOTE: For a seat with three-way adjustment (backrest angle, fore/aft position, and seat cushion height), to change the backrest angle, move the upper lever on the left side of the seat cushion forward or backward, depending on which way you want the backrest to recline.
The seat cushion height adjustment lever is located on the left end of the seat.
If you need to raise the seat cushion, lift the lever up and release it - the cushion will rise slightly. Repeat the operation until the cushion takes the most comfortable position for you.
If you need to lower the seat cushion, push the lever up and release it – the cushion will lower slightly. Repeat the operation until the cushion takes the most comfortable position.
NOTE: Depending on the equipment, an electric seat cushion drive may be installed. In this case, a switch is installed instead of the adjustment lever: when you press the upper part of the switch, the seat cushion rises, when you press the lower part of the switch, it lowers.
The lumbar support roller adjustment lever is located on the left end of the seat back in the middle. The position of the roller is changed by turning the lever forward or backward.
On three-door vehicles, to enter the rear seat, turn the handle located at the top of the seatback, fold the seatback forward until it locks into place, and slide the seat forward.
After the passenger has seated, move the seat back, turn the handle on the seatback and fold the seatback down.
NOTE: Depending on the equipment, there may be a pedal adjustment switch on the seat cover (the location of the switch is shown by the arrow). Press the top of the switch to move the pedal assembly closer to the driver, and press the bottom of the switch to move the pedal assembly away from the driver.
The front seat head restraints are height-adjustable: press the latch and move the head restraint up or down to the desired height. The optimal position of the head restraint is when its upper edge is level with the top of the head.
NOTE: For very tall people, raise the head restraint to its highest position; for very short people, lower the head restraint to its lowest position.
If necessary (for example, to fold the seat into a sleeping position), the headrest can be removed.