1. Disconnect the wire from the terminal «minus» battery.
2. Remove the top..
3.... and the lower part of the casing of the steering column (cm. «Removal and installation of a casing of a steering column»).
4. Remove the steering wheel (cm. «Removal and installation of a steering wheel»).
5. Squeeze the latch..
6.... and disconnect the wiring harness block from the switch.
7. Remove two screws..
8.... and remove the steering column switch for outdoor lighting.
9. Squeeze the latch and disconnect the wiring harness block from the wiper and washer stalk.
10. Turn out two screws of fastening..
11.... and remove the wiper and washer stalk.
12. Install the parts in the reverse order of removal.
Removal of steering column switches assy with the connector, proceed in the following order.
You will need: Flat and Phillips screwdrivers.
1. Disconnect the wire from the terminal «minus» battery.
2. Remove the top..
3.... and the lower part of the casing of the steering column (cm. «Removal and installation of a casing of a steering column»).
4. Remove the steering wheel (cm. «Removal and installation of a steering wheel»).
5. Squeeze the latch..
6.... and disconnect the wiring harness block from the steering column switch for outdoor lighting.
7. Similarly disconnect block of a plait of wires from a steering-wheel switch of a screen wiper and screen washer.
8. Squeeze the retainer with a screwdriver..
9.... and disconnect the wiring harness connector from the airbag contact ring.
10. Remove the top two..
11.... and two lower screws securing the connector to the steering column..
12.... and remove the steering column switches assembly with the connector and slip ring of the airbag.
13. Install the parts in the reverse order of removal.
Visitor comments