Replacing the control unit for power windows and power mirrors

You will need: T25 TORX wrench, flat blade screwdriver.

1. Disconnect the wire from the terminal «minus» battery.



2. Pry with a screwdriver..



3.... and remove the door handle armrest trim.



4. Squeeze the latch..



5.... and disconnect the wiring harness connector from the power window switch.



6. Squeeze the latch..



7.... and disconnect the wiring harness connector from the power mirror switch.



8. Turn out two screws of fastening …



9.... and remove the control unit for power windows and power mirrors.

10. Establish the block of management of electrowindow regulators and the electric drive of mirrors in an order, the return to removal.