Attention! Air is removed from the cooling system automatically after the engine is started.
1. Screw in the coolant drain plug on the radiator (indicated by the arrow).
2. Check the fastening of the flexible cooling system pipes.
3. Fill the system with coolant through the filler hole of the expansion tank to the level marked "MAX" on the tank and screw in the plug.
4. Start the engine and maintain its speed within 1000–1500 rpm until the cooling system thermostat opens.
5. Check the fluid level in the expansion tank, which should be between the "MIN" and "MAX" marks.
The full article is on the online resource FORDBOOK.RU