1. Disconnect the wire from the negative terminal of the battery.
2. Remove the front bumper (see "Removal and installation the front bumper").
3. Press the headlight wiring harness connector lock…
4. …and disconnect the connector from the headlight terminals.
5. Remove one screw from the side mounting of the headlight to the front panel of the body…
6. …and two top mounting screws.
7. Turn the plastic retainer securing the headlight to the wing by 45°…
8. …moving the headlight unit to the side, remove the retainer from the hole in the wing…
9. ...and remove the headlight unit.
10. Install the headlight and all previously removed parts in reverse order.