Contents: Starting a cold gasoline engine ↳ Starting a hot gasoline engine ↳ Starting a gasoline engine with fuel… ↳
Starting a cold gasoline engine
An engine is considered cold when its temperature is below 0°C.
When starting the engine, be sure to depress the clutch to disengage the gearbox with thickened oil. The clutch can be released after the engine starts to run steadily.
Turn on the starter by turning the key in the ignition switch to position III.
Turn on the starter for no more than 10 seconds. If the engine does not start on the first attempt, try to start it again no earlier than after 30 seconds.
Do not press the accelerator pedal when starting the engine.
If the engine does not start after two attempts, then too much fuel has entered the engine and in this case you should follow the recommendations below.
After starting the engine, press the accelerator pedal slightly to increase the idle speed.
Starting a hot gasoline engine
Start the engine without pressing the accelerator pedal.
If the engine does not start after three attempts, follow the recommendations below.
Starting a gasoline engine with fuel overflow
Slowly press the accelerator pedal all the way down and hold it in this position.
Start the engine with the starter.
If the engine does not start, repeat the steps for starting a hot gasoline engine.
The original version can be found on the website [FORDBOOK.RU]