With the ignition off, you will not be able to move the selector lever from the position «R» (protection against theft, rollback). The lever is magnetically locked. If the electrical circuit to the magnetic brake is interrupted when the ignition is switched on - the brake magnet is released by pressing the brake pedal, then you can release the brake by the following procedure.
Stages of work
Remove the cover on the switch console on the right next to the selector lever.
Remove the lock with the ignition key. To do this, firmly insert the key into the hole.
At the same time pull the lever back from the position «R».
Check the selector lever lock circuit, otherwise once the selector lever is in the «R», it will block again.
Visitor comments