Checking the level and adding fluid to the washer reservoir

You will need: in summer - a concentrate of a special fluid for the washer reservoir, diluted with clean water; in winter - non-freezing liquid.

GOOD ADVICE: Use a reputable anti-freeze fluid that does not contain hazardous methanol.

GOOD ADVICE: When the ambient temperature rises, do not dilute the antifreeze in order to save money. In addition to an increase in the freezing point, a diluted liquid has a sharp deterioration in detergent properties.

WARNING: The manufacturer does not recommend the use of ordinary water to fill the washer reservoir.

WARNING: Freezing of the fluid in the washer reservoir will destroy it.

The filler neck of the washer reservoir is located in the engine compartment on the right.



1. To refill, open the reservoir..




2.... add liquid to it to the lower edge of the neck and close the windshield washer reservoir.



3. If the washer jet is clogged, clean it with a sewing needle. It can also be used to adjust the direction of the washer fluid jet.

WARNING: Use only unhardened needles or pins to clean and adjust the jet. The broken tip of the hardened needle cannot be removed from the jet hole.