Air Conditioner Vacuum Hoses (V6 engine)
1. Remove ground wire from battery.
Attention! At the same time, information in electronic storage devices is erased from memory.
2. Remove grille.
3. Remove the radiator wire connector from the right side of the condenser.
4. Unscrew three screws (indicated by arrows) fasteners and remove the fan with the electric motor.
5. Rotate the fan housing so that the fan wires are on the side of the water separator.
6. Detach the fan shield from the top of the case.
7. To remove the fan, unscrew the nut and remove the ring clip.
Attention! The nut has a left-hand thread.
8. Unscrew the fan motor from the housing.
9. Installation is made in sequence, return to removal.
Visitor comments