Removal and installation of a back seat belt

You will need TORX keys T40, T45.

1. Remove the rear seat cushions (see Removing and installing the rear seat).



2. Turn out the screw of fastening of the lock of a belt of the left passenger on a back seat …



3….and remove it.



4. Turn out the screw of fastening of locks of belts of the right and average passengers on a back seat …




5….and remove them.



6. Turn out the screw of the bottom fastening of a belt of the left passenger of a back seat.

7. Similarly turn out the screw of the bottom fastening of a belt of the right passenger of a back seat.

NOTE: This is how the seat belt buckles and lower anchor points are located.

8. Remove the rear seat backs (see Removing and installing the rear seat).



9. Remove the left lining of the trunk shelf..



10….lateral…



11.... and the lower lining of the rear window pillar (see Removing and installing interior linings).


12. Similarly remove facings on the right side.



13. Remove the screw securing the inertial coil to the trunk shelf..



14.... and remove the inertial coil with a seat belt.

15. Similarly remove seat belts of the right and average passengers of a back seat.

16. Install the rear seat belts in the reverse order of their removal.