Perform the operation with an assistant.
To adjust the throttle cable:
Pic. 141. Removing the throttle cable clamp on a 16-valve engine
- remove the adjusting clip (pic. 141) from the throttle cable on the cable and remove the cable;
- ask the assistant to press the accelerator pedal all the way and hold it in this position;
- insert the clamp again;
- release the accelerator pedal and press again;
- Check that the throttle valve can open fully;
- release the accelerator pedal and check if the throttle lever returns to the idle position again;
- start the engine, do not press the accelerator pedal and check the stability of the engine at idle.
Visitor comments