SEQUENCE OF WORKS
1. Ask an assistant to press the accelerator pedal all the way down.
2. Release the accelerator cable from the injection system support and, accordingly, the throttle assembly.
3. Move the accelerator cable housing away from the support until the throttle valve is set to the maximum fuel position.
4. In this position, use a clamp to secure the accelerator cable to the mounting sleeve.
5. Release the accelerator pedal and check if the fuel supply is released through the throttle valve at idle. If the accelerator cable is too loose or sticks, repeat the adjustment.
[The original version can be found on the website: www.fordbook.ru]