Accelerator Cable Replacement on Endura-E Engine Vehicles

SEQUENCE OF WORK



Pic. 8.10. Accelerator cable fastening elements on vehicles with Endura-E engines: 1 - sector of the throttle valve axis; 2 - cable support; 3 – a clip of fastening of a cable of an accelerator

1. Disconnect the accelerator cable from the accelerator pedal and release it from clamp 3 (pic. 8.10).

2. Release the accelerator cable with the mounting sleeve from the support 2.

3. Disconnect the accelerator cable from sector 1 of the throttle axis.

4. Remove the engine compartment bulkhead seal and pull the accelerator cable out of the engine compartment.

5. When installing the accelerator cable, check that the engine compartment bulkhead seal is installed correctly.

6. Further installation is carried out in the reverse order of removal.