Before leaving
- Place the machine on a horizontal surface.
- Turn the steering wheel to the straight-ahead position.
- Turn off the engine.
Safety first
The need to frequently top up the fluid indicates that there are leaks in the system that need to be detected immediately.
1. The reserve fluid tank is located in the rear right corner of the engine compartment. The fluid level is visible through the transparent wall of the tank. When the engine is warm, the level should be slightly below the lower "MAX" mark on the side of the tank.
2. Before adding fluid, wipe the surfaces around the filler neck of the tank. Then unscrew the cap.
3. Add only the fluid recommended by the manufacturer; do not overfill the tank. After refilling, tighten the tank cap securely.
Advice
To perform the check correctly, do not turn the steering wheel after the engine has stopped.
Information for this article was taken from the website (fordbook.ru)