The rear suspension support of the power unit is a non-separable unit consisting of a metal clip and a rubber cushion. The support is attached to the bracket on the gearbox and to the front suspension subframe.
1. Place a secure support under the gearbox housing or hang the power unit with a lifting mechanism.
2. Turn out and take a bolt of fastening of a back support of a suspension bracket of the power unit to an arm on a transmission.
3. Turn out and take a bolt of fastening of a support to a subframe of a forward suspension bracket.
4. Remove the support.
5. Install the rear powertrain mount in the reverse order of removal.
NOTE: Pay attention to the labeling of the support.
Get a new support with the same marking.
Visitor comments