1. Raise the glass up to the stop.
2. Remove the upholstery of the rear door (see Removing and installing tailgate trim).
3. While pressing the latch, disconnect the wiring harness block from the speaker connector of the speaker system.
4. Turn out three bolts of fastening of the loudspeaker to the internal panel of a door …
5….and remove it.
6. Pressing the latch..
7.... disconnect the wiring harness connector from the power window and central locking control module connector.
8. Remove the three bolts securing the power window and central locking control module..
9….and remove the module.
10. Peel off the moisture-proof film from the inner door panel and remove it.
11. Separate the decorative lining of the window opening, overcoming the elastic resistance of its spring holders, starting from its lower rear part..
12.... and, successively squeezing the lining, moving to the front of the door, remove it.
13. Remove the inner window sill, overcoming the elastic resistance of its spring holders.
14. Remove the outer window sill, overcoming the elastic resistance of its spring holders.
15. Remove the glass seal first from the rear of the door frame..
16.... and further to the top of the frame.
17. Turn out the screw of fastening of a back decorative slip of a frame of a door …
18.... remove the piston of its fastening..
19.... and, lifting the overlay, remove it.
20. Remove the glass seal from the front of the door frame.
21. Turn out three screws of fastening of a forward decorative slip of a frame of a door …
22.... and, lifting the trim, remove it.
23. Remove the screw from the power window slider hole.
24. Depress the slider retainer by inserting a screwdriver blade between the glass and the retainer.
25. Remove the glass from the door by pulling it up and turning it in the doorway, as shown in the photo.
26. Establish glass of a back door and all removed details in an order, the return to removal.
Visitor comments