Note: Replace the oil filter every time you change the oil.
To change the oil:
- warm up the engine for about 10 minutes;
- Raise the front of the car slightly;
- unscrew the oil filler plug;
- Loosen the drain plug on the oil pan;
- place a container for used oil under the drain hole and completely unscrew the screw;
Warning: Hot oil will squirt out in a strong stream.
- after the oil has drained, screw the drain plug into the oil pan together with a new sealing ring;
- carefully tighten the drain plug;
- replace the oil filter:
- start the engine;
- check the oil level and the tightness of the drain plug and oil filter. Tighten the oil filter if necessary.
[The original source of this article can be found at: www.FordBook.ru]