General information and adjustment of the sunroof (Mondeo 1 and 2)

1. The hatch should open freely, without jamming. When closed, the hatch panel should be flush with the roof panel.

2. If adjustment is necessary, open the sunshade cover while leaving the glass panel closed. Remove the three screws securing the lower frame to the glass panel. Slide the lower frame back, pushing it into the roof.

3. Loosen the center and front mounting screws. Adjust the glass roof panel so that its front edge is flush with the roof panel. Then tighten the mounting screws.

4. Move the lower frame forward. Insert and tighten the mounting screws.