2. Select a menu item "Module configuration".
3. Select the required module. The vehicle data must be read before the module is removed. If the required module does not communicate with the Diagnostic System Tester, contact "Hotline" and enter the vehicle identification number (VIN).
4. Read the module code and/or vehicle data from the failed module.
5. Remove the defective module and install a new module as described in the respective operation
- PCM/Module - Passive anti-theft system (PATS)
- Module - ABS
- Module - Airbag
- Dashboard
- Central timer module (STM)
6. Using the Diagnostic System Tester, configure the new module according to the model variant.
7. Disconnect the Diagnostic System Tester from the DLC.
8. Check the operation of the relevant systems (s).
Visitor comments