Withdrawal
Raise the car
Remove the rear muffler mount, lower the rear of the exhaust system and support see point 8.
Turn out on the right and at the left connecting bolts of a bumper/wheel niche.
Turn out four nuts of fastening.
Pull the bumper back and thereby remove it from the side pins.
Remove the bumper.
Installation
Install the bumper so that its grips fit into the side pins.
Tighten the sprinkling nuts with a torque of 10 Nm.
Fix the bumper with the wheel arch/bumper connecting bolts.
Install the exhaust system equipment, see point 8.
Lower the car.
Visitor comments