Contents: Removal ↳ Installation ↳
Removal
Mark the position of the wheels on the hub with paint so that they can be installed in the same place during assembly. Loosen the wheel nuts on the lowered car. Raise the front of the car and remove the front wheels.
Remove the five mounting bolts "1".
Using a Phillips screwdriver, unscrew the four screw clamps "2" and remove them.
Remove the inner splash guard.
Installation
Install the inner mudguard, secure it with screw clamps "2" and bolts "1".
Install the front wheels so that the marks applied earlier match. Before installing the wheels, lubricate the centering surface on the wheel hub with a thin layer of grease. Screw on the wheel mounting nuts. Lower the car and tighten the nuts crosswise to a torque of 100 Nm.