Replacing generator brushes (Mondeo 2)

Replace the generator brushes on a 16-valve engine as follows:



Fig. 290. Fastening the generator regulator on a 16-valve engine

- unscrew the regulator mounting bolts on the rear side of the removed generator and remove the regulator (Fig. 290);

- attach the new regulator to the generator, remove the brush safety pin;

- install the generator and connect it to the battery.

To replace the generator brushes on a V6 engine, proceed as follows:



Fig. 291. Fastening the regulator to the V6 engine generator

- unscrew the rear cover on the removed generator (Fig. 291);

- unscrew the regulator/brush holder mounting bolts and remove the regulator from the generator;

- insert the new regulator and secure it with bolts;

- reinstall the rear cover, install the generator and connect it to the battery.