Front shock absorber strut:
1 - Cap
2 - Shock absorber strut mounting nut, 45 Nm
Caution! When tightening the nut, the car must stand on its wheels.
3 - Shock absorber strut holder
4 - Thrust support nut, 60 Nm
Caution! Loosen the nut only when the spring is compressed in the device. Risk of injury.
5 - Rubber stop
6 - Ball joint
7 - Upper spring plate When installing, make sure that the spring enters the stamping of the plate.
8 - Coil spring
9 - Compression buffer. The buffer limits the travel of the shock absorber strut spring during compression. During expansion, the spring travel is limited by an internal stop.
10 - Shock absorber piston rod seal
11 - Lower spring plate When installing, make sure that the spring enters the stamping of the plate.
12 - Shock absorber
13 - Steering knuckle
14 - Clamp bolt, 85 Nm. For the lower mounting of the shock absorber strut.