Withdrawal
Pry out the ventilation nozzle with a small screwdriver. To prevent damage to the dashboard, place a piece of paper under the screwdriver.
Remove the glovebox. To do this, open the box and pull it towards the co-driver's seat.
Remove the glovebox light bulb -1-, if present.
Unscrew the glove box trim with the three screws -2- and remove it from the two rear clips.
Remove the ventilation nozzle from the connecting hose.
Installation
Insert the ventilation nozzle into the connecting hose, holding the hose through the opening of the glove box with your hand.
Insert the ventilation nozzle into the dashboard.
Hang the glove box trim from the back and fasten with three screws.
Insert the glove box light bulb, if available, into the socket.
Insert the glove box into the holder.
Visitor comments