Contents: Removal ↳ Installation ↳
Please note: The antenna wire runs from the roof mounting point above the right A-pillar (roof pillar in front of the front door) through the instrument panel.
Removal
Note: The antenna pin can be unscrewed separately from the antenna.
Press the shell in front of the inner light with a flat screwdriver, placing a rag underneath.
Unscrew the Torx screw "5" through the hole.
Remove the antenna wire from the antenna leg and lift the antenna with the leg up from the roof.
Installation
Mount the antenna on the roof and screw the antenna leg from below together with the antenna wire. Make sure that the Torx screw sleeve is correctly positioned in the roof.
Check the antenna operation.
Insert the shell.