Cause |
Your actions |
A. Side windows only move in one direction. |
Defective switch. |
Replace switch. |
B. The side windows are blocked. |
- Too tight fit - blown fuse.
- The engine is not running - the fuse is good.
|
- Set the normal course of the side windows - replace the fuse.
- Temporarily apply voltage to the motor. If it works, the defect is in the wiring, otherwise replace the engine.
|
B. Side windows open and close slowly. |
- The side windows are clamped in the guides.
- Strong friction in all mechanics.
- Wire connections are defective or oxidized.
- The switch is defective or oxidized.
|
- Check the glass gap, correct if necessary.
- Check the entire mechanical part for friction losses with no glass, replace if necessary.
- Check, clean, replace if necessary.
- Check, replace if necessary.
|
D. The side windows open and close slowly in the upper area. |
See Q1. |
— |
* The power windows only work when the ignition is on.
Visitor comments