Cooling system hoses (Mondeo 2)

Use cooling system hoses ordered according to engine number.

To replace the coolant hose:

- drain the coolant from the system;

- unscrew the screws at the mounting points (if there are screw clamps);

- squeeze both ends of the clamp until they stop (for spring-loaded band hose clamps);

- remove the hose. If the hose is very tight, gently pry it off with a screwdriver;

- Place the new hose onto the connecting nipple, using hose clamps to secure it. Do not overtighten the clamping screw to avoid damaging the thread or cutting the hose.

The text was obtained in its entirety from the specified website FORDBOOK