Anti-corrosion protection of the underbody and preservation of vehicle cavities (Mondeo 1)

The entire base of the vehicle, including the wheel arches, is coated with polyvinyl chloride protective grease. Particularly damaged areas of the front wheels are protected from stone impacts by plastic covers. In addition, parts of the body that are subject to corrosion are made of high-strength or galvanized sheet metal. After the cold season and washing the base of the vehicle, the coating should be checked and, if necessary, additional preservation should be carried out.

Dust, sand, and clay can accumulate in the centrifugal areas of the vehicle's base. Removing accumulated dirt mixed with salt after the winter season is very important.

Preservation of the engine compartment: to prevent corrosion on the front part of the vehicle (e.g. side parts, longitudinal beam or bulkheads) and the drive unit, it is necessary to spray high-quality preservative wax on the brake system parts in the engine compartment, as well as the front axle and steering components after washing the engine.

Caution! Before washing the engine, which can be done with a cold cleaner and a steam jet ejector, the generator, fuse boxes and brake fluid reservoir should be covered with a plastic protective shell.

[For more information, please visit the specified website: fordbook.ru]