Before washing, soften the remains of dead insects and rinse off.
Use sufficient water.
Use a soft sponge or a very soft washing brush with a hose attached to wash your car.
Do not wash the varnish coating with too strong a stream of water.
Rinse the sponge more often.
Use clean automotive leather to dry.
Use only good branded detergents. Rinse the car with clean water after using the detergent.
To protect the varnish coating, you can add a cleaning preservative to the water.
If you use the detergent regularly, you need to preserve it more often.
Never wash or dry your car in the sun, as this will cause stains on the paintwork.
Salt scattered on the highway damages especially all internal flanges, joints and edges of doors and hood. Therefore, these areas should be thoroughly cleaned with a sponge at each car wash, including after an automatic car wash, and then rinsed with clean water and dried.
Attention! After washing the car, the braking effect is reduced due to moisture getting on the brakes. Therefore, dry the brake pads by braking briefly.
(For details, please visit the website fordbook.ru)