1. Disconnect the wire from the negative terminal of the battery.
2. Remove the front wheel arch liner on the side of the fog lamp bulb being replaced (see Removing and installing wheel mudguards and fender liners).
3. Disconnect the wiring harness connector from the fog lamp base by pressing the locking tab.
4. Remove the two screws securing the fog light to the front bumper…
NOTE: This is the location of the fog light mounting screws.
5….and remove the headlight.
NOTE: Pay attention to the marking of the fog lamp. For replacement, purchase a lamp with the same marking. Fog lamps are distinguished as right and left.
6. Install the fog lamp and all removed parts in the reverse order of removal.
7. If necessary, adjust the fog light after installation.