Contents: Central lighting switch ↳ Heated front and rear windows ↳ Rear window defroster switch ↳ Front window heating switch ↳ Instrument panel light controller ↳ Headlight leveling regulator ↳ Adjustment of electrically… ↳ External (panoramic) mirror on the… ↳
Central lighting switch
See position 4 in Paragraph 2.
1. Everything is off - neutral position of the switch.
2. Side lights - turn one position to the right.
3. Headlights - turn two positions to the right with the ignition on.
4. Left side lights - turn by pressing left one position.
5. Right side lights - turn by pressing left two positions.
6. Front fog lights - with the exterior lights on, pull the switch out one position. When the headlights are turned on, the corresponding indicator lamp will light up on the display.
7. Rear fog lights - with the exterior lights on, pull the switch out two positions. When the lights turn on, the corresponding indicator lamp will light up on the display.
When the front and rear fog lights are switched on simultaneously, the corresponding indicator lamps on the display will also light up simultaneously.
On vehicles not equipped with rear fog lights, the switch can only be pulled out one position.
Warning: When the exterior lights are on, opening the driver's door will cause an audible signal.
Warning: It is recommended to turn on the fog lights only in cases of limited visibility (less than 50 m) and it is not recommended to use them in rain or snow.
Heated front and rear windows
See position 1 in Paragraph 2.
To turn on the heating, you need to press the switch. The corresponding control lamp will light up.
Rear window defroster switch
Heating can only be turned on when the ignition is on. If the exterior mirrors are electrically operated, the mirror heating will also be turned on automatically. After 10 minutes, the system will switch off automatically, but can be turned on again if necessary.
Front window heating switch
This system provides rapid defrosting of the windshield and heating of the front windshield washer nozzles. The heating only works when the engine is running and switches off automatically after 4 minutes. It can be switched on again if there is still ice or condensation on the windshield.
Instrument panel light controller
See position 3 in Paragraph 2.
It can be used to change the intensity of the instrument panel lighting. The regulator only works when the external lighting is on.
Headlight leveling regulator
See position 2 in Paragraph 2.
If desired or depending on the vehicle load, the headlight tilt can be adjusted: turning the regulator up raises the light, turning it down lowers it. The recommended regulator position depending on the vehicle load is given in the table.
Note: when driving with a trailer, add +1 to the regulator setting.
Adjustment of electrically adjustable exterior mirrors
See position 15 in Paragraph 2.
The position of the mirrors can be adjusted using a special switch: to change the position of the left mirror, you need to turn the switch to the left, the right - to the right. Then adjust the tilt and return the switch to the previous neutral position. The heating of the outside mirrors is turned on simultaneously with the heating of the rear window.
External (panoramic) mirror on the driver's door
This mirror increases the rear view field, minimizing the so-called "blind spot".
Warning: It is important to remember that objects reflected in a convex mirror appear further away than they actually are. Therefore, to correctly estimate the distance, you need to use other mirrors.