Installing the front wheels
| Wheel alignment: | |
| Acceptable value that does not require adjustment (reverse convergence) | 1.5 mm (convergence)...1.5 mm |
| Installation during adjustment (reverse convergence) | 0 ±1.0 mm |
Installing the rear wheels
| Wheel alignment: | |
| Acceptable value that does not require adjustment: | |
| Sedan/Hatchback (reverse convergence) | 3.9 mm (convergence)...0.1 mm |
| Universal (inverse convergence) | 2.7 mm (convergence)...1.3 mm |
| Installation during adjustment: | |
| Sedan/Hatchback | 1.9 mm ±1.2 mm (convergence) |
| Station wagon | 0.7 mm ±1.2 mm (convergence) |
Wheels and tires
| Wheel sizes: | |
| Stamped steel | 14x5.5, 15x5.5, 15x6 |
| Cast* | 14x5.5, 15x6, 16x6, 16x6.5 |
| Tire sizes | 185/65/14. 195/60/14, 195/60/15, 195/55/15, 195/50/16, 205/55/15, 205/50/16 |
| Tire pressure | see here. |
* Some models with alloy wheels are equipped with a spare wheel with a steel rim
Tightening torques for connections
| Name | Nm |
| Front suspension | |
| Anti-roll bar clamp bolts | 24 |
| Anti-roll bar connecting link | 47 |
| Drive shaft/hub nut | 340 |
| Front subframe | 130 |
| Ball joint lower arm to lower arm | 58 |
| Bolt of clamping pin of ball joint of lower arm in steering knuckle | 83 |
| Lower arm to subframe: | |
| Stage 1 (Reinstalling components) | 50 |
| Stage 2 | Turn 90° further |
| Strut support bearing nut | 59 |
| Upper strut support nut (replacement) | 46 |
| Suspension strut to steering knuckle mounting bolt | 84 |
| Rear suspension (Sedan/Hatchback) | |
| Anti-roll bar | 25 |
| Anti-roll bar connecting link | 35 |
| Beam mounting bolts | 120 |
| Disc brake mudguard | 90 |
| Rear drum brake shield | 50 |
| Front lower arm to axle support and beam | 84 |
| Hub Nut | 290 |
| Rear lower arm to beam | 84 |
| Rear lower arm to axle support | 120 |
| Suspension strut to axle support | 84 |
| Upper strut support bolts | 27 |
| Upper nut of suspension strut | 50 |
| The reaction lever and its bracket | 120 |
| Rear suspension (station wagon) | |
| See data for models (Sedan/Hatchback), taking into account the following. | |
| Anti-roll bar | 23 |
| Front lower arm to axle support and beam | 120 |
| Bolts securing the hub to the steering knuckle | 65 |
| Lower strut support bolt | 120 |
| Upper strut support bolt | 84 |
| Reactive lever to the bottom | 120 |
| Reactive lever to bracket | 120 |
| Reactive arm to steering knuckle | 84 |
| Upper arm to beam | 84 |
| Upper arm to axle support | 120 |
The article was taken in its entirety from the specified website www.fordbook.ru
