Filling tanks
| Engine oil | |
| When changing oil and filter | |
| 4-cylinder engine | 4.25 liters |
| 6-cylinder engine | 5.5 liters |
| The difference between the "MIN" and "MAX" marks on the dipstick | 0.5...1.0 liter |
| Cooling system | |
| Models with manual transmission | |
| 4-cylinder engine | 6.6 liters |
| 6-cylinder engine | 9.5 liters |
| Models with automatic transmission | |
| 4-cylinder engine | 7.1 liters |
| 6-cylinder engine | 9.7 liters |
| Fuel tank | 61.5 liters |
| Manual transmission | 2.6 liters |
| Automatic transmission | |
| 4-cylinder engine: | |
| Total, including radiator | 9.0 liters |
| When refueling after draining | 5.5 liters |
| 6-cylinder engine: | |
| Total, including radiator | 10.3 liters |
| When refueling after draining | 6.5 liters |
Engine
Cooling system
Coolant parameters with a component ratio (antifreeze/water) of 40%
| Thickening temperature | -25°C |
| Curing temperature | -30°C |
Fuel system
| Air filter | Champion U632 |
| Fuel filter | Champion L218 |
Ignition system
| The order of operation of the cylinders: | |
| 4-cylinder engine | 1-3-4-2 |
| 6-cylinder engine | 1-4-2-5-3-6 |
| Position of cylinder #1: | |
| 4-cylinder engine | from the timing belt side |
| 6-cylinder V-engine | from the timing chain side, 8 rear block |
| Spark plugs:* | |
| Type/spark gap | |
| 4-cylinder engine | Champion RE7PYC5/1.3 mm mm |
| 6-cylinder engine | Champion RS9YCC/0.9mm mm |
* Information regarding spark plugs and spark gap corresponds to the manufacturer's recommendations (Champion). In case of installing other type of spark plugs, refer to the manufacturer's recommendations.
Brake system
Note: There is no minimum thickness requirement for the friction material used in the brake pads. The following values are provided by Ford as guidelines only. If the brake pad wear indicator illuminates before the front brake pads have worn to the minimum, the brake pads should still be replaced immediately.
| Minimum thickness of friction material of front or rear disc brake linings | 1.5 mm |
| Minimum thickness of friction material for rear drum brake linings | 1.0 mm |
Tightening torques for connections
| Tightening torques for connections | Nm |
| Automatic Transmission Oil Drain Plug | 27 |
| Engine oil drain plug: | |
| 4-cylinder engine | 25 |
| 6-cylinder engine | 26 |
| Manual Transmission Oil Drain/Inspection Plug | 35 |
| Wheel mounting nuts | 85 |
| Seat belt mounting bolts | 38 |
| 4-cylinder engine | 15 |
| 6-cylinder engine | 14 |