2. Remove the locking mechanism of the adjusting nut by inserting a screwdriver between it and the coupling.
3. Remove the rear wheels and hubs (brake drums).
4. Remove the parking brake tip from the parking brake actuator lever and remove it from the brake shield.
5. Remove the right cable from the cable connector.
6. Remove the spring clips and remove the cables from the bracket and guides on the underbody of the vehicle.
7. In the car's interior, remove the front parking brake cable from the parking brake lever by removing the spring clip and removing the pin from the lever.
8. Push the cable guide back, remove the cable through the bottom and remove it from the guide.
9. Installation of the parking brake cables is carried out in the reverse order of removal.
10. Lubricate the cable groove on the equalizer with grease and adjust the cable tension.
The original source of the publication is on the website: FORDBOOK.ru