Motorcraft Ignition Distributor
The gap between the breaker contacts is 0.55–0.7 mm;
1 - interrupter; 2 - screw; 3 - adjusting screw; 4 - capacitor; 5 - shaft; 6 - oil accumulator
Bosch ignition distributor
The gap between the breaker contacts is 0.4–0.5 mm;
1 – cover holder; 2 - wire; 3 - contacts; 4 - shaft; 5 – draft of the vacuum regulator; 6 - lever; 7 - vacuum regulator
1. Remove cover and distributor rotor.
2. Turn the crankshaft until the breaker contacts are fully open.
3. Use a feeler gauge to check the clearance (A) and adjust if necessary.
Visitor comments