Adjusting the speed increase device
1 – leash lever; 2 – vacuum piston; 3 – vacuum piston lever
Adjustment
1. Unscrew the 3 bolts securing the automatic starting device cover and remove the cover.
2. Turn the drive lever clockwise until the holes in the brass bushing and in the carburetor body are aligned and insert a rod of the appropriate diameter into the holes.
3. Move the vacuum piston down until it stops, while the drive lever and the vacuum piston lever should touch.
4. Turn the leash lever clockwise or counterclockwise until it stops.
Attention! The direction of rotation for different models is different and is given in the carburetor data.
5. Remove the rod and install the starter cover.
(Information for this article was taken from the website: Fordbook.ru)