Withdrawal
Remove the negative terminal from the battery.
Drain the coolant from the cooling system. Remove toothed belt and belt tensioner. Remove the coolant hose from the water pump (see fig. 3.30).
Unscrew the 4 bolts securing the water pump to the front side of the cylinder block and remove the pump (see fig. 3.31).
Installation
Clean the mating surfaces of the water pump and engine. The water pump is a non-separable type, therefore, if there are any defects in the pump, it must be replaced. Installation is made in sequence, return to removal.
Install the toothed belt and tensioner.
Pour coolant into the cooling system. Connect the battery.
Visitor comments