Wiper arm drive

Withdrawal

Turn on the wiper motor and turn it off after the blades are in their original position. Remove the ground wire from the battery. Remove the wiper arms.

Remove the grille in front of the windshield. The grid is attached with 6 plastic screws and 2 steel screws located under the plastic caps (see fig. 12.63).



Unscrew 4 bolts of fastening of a screen wiper and take a screen wiper. Disconnect the electrical connector from the wiper (see fig. 12.64).



Using a lever, remove the wiper link from the wiper arm shaft.

Remove the head from the wiper arm shaft, then the retaining ring, two special washers and remove the wiper arm shaft (see fig. 12.65).

Installation

Installation is carried out in the reverse order of removal.