Door lock, lock cylinder and handles (Escort 5)

Removal

Remove the door trim and protective film.

Door lock cylinder

Move aside and remove the door lock cylinder mounting bracket. Disconnect the rod from the inside of the door lock cylinder and remove the lock cylinder from the door (see Fig. 11.29, 11.30).

Door lock

Remove the door lock cylinder. On vehicles with central door locking, disconnect the connector from the door lock actuator motor.



Remove the inner drive of the lock. To do this, unscrew the screw securing the inner door handle, move it forward and remove it. Unscrew the 3 screws securing the door lock (see Fig. 11.31).



Remove the rear glass guide (rear doors only).

Remove the lock together with the internal door opening drive through the opening on the inside of the door (see Fig. 11.32-11.34).







On vehicles with central door locking, unscrew the 2 mounting screws and disconnect the lock from the lock drive motor.

Internal door opening handle

Remove the inner door opening handle from the door and disconnect the lock opening rod from it (see Fig. 11.35, 11.36).

External door opening handle

Unscrew the 2 screws securing the door handle, disconnect the lock drive rod from the handle and remove it. To access the screws securing the rear door handle, remove the plug on the door (see Fig. 11.37, 11.38).

Installation

Installation is carried out in the reverse order of removal.

[Information for this article was taken from the website: FordBook.ru]