Engine Block — Specifications (Escort 4)

The cast iron cylinder block has cylinders and crankshaft bearing seats made directly in its material. It contains five crankshaft main bearing seats. Between adjacent cylinders in the cylinder block there are channels for the passage of coolant.

Cylinder diameters

Engine 1.8 dm³
Nominal:
– group KL 1	82,500 – 82,515 mm
– group KL 2	82.515 – 82.530 mm
– group KL 3	82.660 – 82.675 mm
– group KL 4	82.675 – 82.690 mm
Repair:
– group KL 5 + 0.5	83,000 – 83,015 mm
– group KL 6 + 1.0	83.500 – 83.515 mm
Diameter of the holes of the main bearing shell seats	53.683 – 53.696 mm
Engine 1.6 dm³
Group A	80,000 – 80,015 mm
Group B	80.015 – 80.030 mm
Group C	80.160 – 80.175 mm
Group D	80.175 – 80.190 mm
Group E	80.500 – 80.515 mm
Group F	80.800 – 80.815 mm