Door lock
1 – outer door opening handle rod; 2 – lock cylinder rod; 3 – pull rod to door lock button; 4 – pull rod to the inner door opening handle
1. Remove the door trim.
2. Carefully remove the protective film opposite the door lock. Since August 1988, a foam panel glued to the door with butyl glue has been installed instead of the film.
3. Disconnect the clamps and remove the rods from the inner and outer handles and the lock cylinder.
4. Unscrew the screw and move the door glass guide to the side.
5. Unscrew the three bolts securing the door lock.
6. Lower the lock and disconnect the rod to the door lock button. Remove the lock through the lower hole in the door.
7. Installation is carried out in the reverse order of removal.