2. Remove the seal at the top of the door opening.
3. Unscrew two mounting screws on each side of the rear pillar.
4. Remove the ceiling trim retaining clips and unscrew the trim in the rear door area.
5. Unscrew the bolts securing the gas-filled door stops. To remove the ball joint, remove the plastic pin.
6. While holding the door, unscrew the door hinges from the body and remove the door.
7. Remove the trim from the door by turning the trim fastening clips 90°.
8. Remove the rear door lock and wiper motor.
9. Remove the lock cylinder, first removing the spring clip.
10. Installation is carried out in the reverse order of removal.