Wheel alignment angles
Convergence:
- permissible values (all models) - from -4.5 mm
(negative toe-in) to + 0.5 mm (positive toe-in) or from - 0°45' (negative toe-in) to 0°05' (positive toe-in).
- adjustment values (all models) - from -2.0 mm
(negative toe-in) to ±1 mm (positive toe-in) or from -0°20' (negative toe-in) to ±0°10' (positive toe-in)
Disks
Type and size (depending on model)
- stamped - 13x5, 13x6 (Van), 14x6 or 15x6;
- cast 13x5, 14x6 or 15x6.
Tires
Tyre sizes (depending on the model) - 155R 13 78T, 165R 13-C, 165R 13-T, 165RI3-REINF, 175/70R 13 82T, 175/70R 13 82-H, 185/50R 14H/V, 185/60R 14 82-H, 185/60R 14 V, 195/50R 15 V, 195/55R 15V.
Tire pressures
Sedan, Hatchback, front/rear wheels:
- average load - 2.0/1.8 bar
- full load - 2.5/2.8 bar
Van, model "55":
- average load - 2.0/1.8 bar
- full load - 2.4/3.0 bar
Van. model "75":
- average load - 2.4/2.6 bar
- full load - 2.6/3.5 bar
Tightening moments
| Front suspension | |
| Drive shaft hub lock nut | |
| — M20 x 1.5 (drive shaft with 23 splines) | 220 Nm |
| — M22xl 5 (drive shaft with 25 splines) | 235 Nm |
| Lower arm to steering knuckle clamp bolt | 54 Nm |
| Bolts for fastening the lower arm to the beam (the car is on wheels): | |
| - stage 1 | 50 Nm |
| - stage 2 | let go completely |
| - stage 3 | 50 Nm |
| - stage 4 | turn to an angle of 90°. |
| Anti-roll bar to suspension arm | 50 Nm |
| Anti-roll bar bolts | 24 Nm |
| Lower beam mounting bolts | 85 Nm |
| Upper suspension mount nut | 46 Nm |
| Upper suspension spring mounting nut | 58 Nm |
| Rear suspension (Hatchback, Sedan and Combi) | |
| Rear hub bearing nut | 260 Nm |
| Axle suspension bolts | 50 Nm |
| Front Axle Bushing/Hang Bolts | 120* Nm |
| Upper Mounting Nuts (Hatchback and Sedan) | 35 Nm |
| Lower strut mount (Hatchback and Sedan) | 120 Nm |
| Upper Tie Bolt (Hatchback & Sedan) | 50 Nm |
| Upper shock absorber installation (Combi) | 50 Nm |
| Lower shock absorber installation (Combi) | 69 Nm |
| * Force measured from the bolt head (not the nut) | |
| Rear Suspension (Van) | |
| Rear hub bearing nut | 260 Nm |
| Upper shock absorber installation | 50 Nm |
| Lower shock absorber installation | 68 Nm |
| Suspension of the shock absorber to the body | 35 Nm |
| Spring U-bolt fastening nuts | 41 Nm |
| Front spring mounting bolt | 84 Nm |
| Upper mount of the rear spring earring | 50 Nm |
| Lower mount of the rear spring earring | 84 Nm |