Contents: Removal ↳ Installation ↳
Removal
1. Remove the panel surrounding the instrument cluster as described in Section 7, paragraphs 1-5 inclusive.
2. Using a well-sharpened screwdriver as a lever, carefully separate the indicator lamp unit from the tachograph. Disconnect the multi-pin plug and remove the unit.
3. The bulb holders can be removed from the back of the unit by unscrewing them from the back of the panel.
4. To remove the printed circuit board, remove all bulb sockets, disconnect the multi-pin plug connector, and carefully remove the printed circuit board from the back of the panel.
Installation
5. Installation is carried out in the reverse order of removal.
The original can be found on the specified resource: FORDBOOK.RU