Contents: Removal ↳ Installation ↳
Removal
1. Remove the panel surrounding the instrument cluster as described in Section 7 paragraphs 1-5 inclusive.
2. Push the combined fuel and temperature gauge out of the panel and disconnect the multi-pin connector.
3. Unscrew the four fixing screws and remove the front cover of the indicator. Unscrew the four nuts and remove the indicator from the rear housing (see Figure 8.3).
Figure 8.3,a. Screws for mounting the combined fuel level and temperature sensor on models with a tachograph.
Figure 8.3,b. Removing the combined fuel level and temperature sensor on models with a tachograph.
Installation
4. Installation is carried out in the reverse order of removal.