Contents: Removal ↳ Installation ↳
Removal
1. Disconnect the negative battery cable.
2. Loosen the retaining screws and remove the upper and lower covers from the control column.
3. Remove the heater switch and, if applicable, the intermittent wiper switch.
4. Unscrew the four retaining screws and remove the panel surrounding the instrument cluster to disconnect the switch wires.
5. Disconnect the switch connectors. Unscrew the light bulbs and remove them. Remove the panel.
6. Unscrew the four retaining bolts and remove the tachograph assembly. Disconnect the multi-pin plug and remove the tachograph.
7. Unscrew the two nuts and remove the tachograph from the mounting bracket.
Installation
8. Installation is carried out in the reverse order of removal.
The original article is available on the website FORDBOOK