Replacing the rear brake cylinder (Fiesta 2)

Remove the brake drum. To do this, remove the drum together with the hub, moving it away from the brake shield. Unscrew and remove the central hub mounting nut.

Disconnect the flexible brake hose.

Disconnect the hard brake line from the cylinder.

Move the pads towards each other so that the adjustment latch lever moves away from the cylinder.

Unscrew the cylinder bolts from the brake shield (Fig. 6.9).



Remove the cylinder.

Replace the cylinder with a new one. The cylinder is installed in the reverse order.

Install the hub with the brake drum and secure it to the axle journal.

The clearance in the hub bearings is set automatically.

Bleed the brake system.

[This article was borrowed from the website www.FordBook.ru]